When it comes to Christmas trees the fakes are just as fabulous as real trees. Ingenuity coupled with modern technology has made most faux trees fantastic. Flocked, frosted, fiber-optics, solar power ? these are just a few of the technological advances coupled with quality craftsmanship and features like realistic needles which have made it difficult to impossible to distinguish the fakes from the real thing.
Lead serves as a stabilizer in some forms of PVC. The one serious study (PDF) we’ve seen on artificial Christmas trees, published in 2004 in the Journal of Environmental Health, found that the lead levels and risk of lead exposure were generally very low, and well below federal guidelines at the time; a few models were outliers, however, and one slightly exceeded the federal limits. Lead exposure occurred in two ways: direct contact with the branches—as may occur when people are setting the trees up and decorating them—and contact with PVC dust beneath the tree, the result of physical decomposition of the “pine needles,” a particular concern for crawling infants. Significantly, new trees (new in 2004, that is) generally showed much lower levels of lead than trees manufactured in the 1980s and 1990s. The authors concluded that while the proportion of trees made with lead-stabilized PVC had “decreased only modestly” in the 20 years preceding 2004, “the amount of lead stabilizer used has been reduced to a much larger extent,” suggesting a long-term trend toward low-lead or lead-free artificial trees.
True Needle™ Technology Balsam Hill's exclusive True Needle&tade; evergreen foliage is used to create our most realistic and luxurious artificial Christmas trees. This ultrarealistic foliage is created with injection-molded PE plastic and several different colors of pigment to mimic the structure, texture, and color of natural evergreen needles. A unique feature of True Needle™ foliage is the color variations within the branches. For example, the branch might be a brown/green while the needles start off a dark green and slowly fade to a lighter green.
For this stand, three strong galvanized pins are included to help lock and centralize the tree in place, before the reinforced screws put in its final position. While this may take some time to complete, once it’s done, the stand holds any tree up to ten feet securely in place. Backed by a spill-proof guard and a water tank that can hold up to two gallons, keeping your tree moist will be a non-issue.

We had hands-on time with the Tree Genie XXL Deluxe, which matches our main pick spec for spec with a couple exceptions. First, there is a bell on the end of the foot pedal that dings and locks the pedal automatically when the stand’s claws are fully tightened. Also, the claws on the XXL Deluxe loosen on the tree one pedal lift at at time, instead of releasing all at once. These are nice features, but they’re not necessary, and they add about $10 to the total cost.


Add festive cheer to your home this holiday Add festive cheer to your home this holiday season with the Aleko 8 ft. Artificial Holiday Tree. This snow dusted artificial green tree is ready to bring out your inner holiday spirit. Along with the impressive 8 ft. H our Holiday Tree has branches crafted with a dense saturation of ...  More + Product Details Close

After placing the tree into the stand, a foot pedal tightens a steel cable and five ratcheting arms around the base of the tree. We found that this system allows for a more even distribution of pressure. During testing, we struck the Deluxe with considerable force and found the extendable legs more than enough to keep our 7.5-foot-tall tree from tipping over.
One of the Krinner’s other major advantages is the ability to handle a wide range of trunk sizes. With the claws cranked all the way down, this stand will hold a tree with a trunk as small as 1 inch in diameter. The maximum trunk diameter it will accept is 7 inches. That gives you a lot of flexibility on tree sizes. When testing on our smaller tree, with its 3.5-inch diameter trunk, some other stands’ screws could barely extend far enough to meet the trunk (and they wouldn’t work with a tree any smaller than that).
Christmas ornaments are decorations (usually made of glass, metal, wood, or ceramics) that are used to decorate a Christmas tree. The first decorated trees were adorned with apples, white candy canes and pastries in the shapes of stars, hearts and flowers. Glass baubles were first made in Lauscha, Germany, and also garlands of glass beads and tin figures that could be hung on trees. The popularity of these decorations grew into the production of glass figures made by highly skilled artisans with clay molds.
Wirecutter senior editor Erica Ogg’s parents, Steve and Debi Ogg, tested the Krinner for a year and they reported that it was “probably the best Christmas tree stand we’ve owned.” Steve was especially impressed with the easy setup, saying, “I’ve never been able to set up a Christmas tree by myself. I’ve always had to have someone else hold it up, while I’m down there [trying to screw in bolts].” With the Krinner, “I could hold it in and use the foot ratchet thing, didn’t need anyone else.”
Height and dimensions: Consider the height of the tree you’d like to purchase, bearing in mind that you’ll need to access the top of the tree for decorating. If the ceilings in your home are within the standard (American) eight to nine foot range, a 7.5 foot tree is probably ideal for you. The dimensions of the tree you purchase should be dependent on where you’re displaying it. If you’re placing it in a small corner, a narrow tree is best, whereas a tree with a wide girth is best for a front and center display.

Finally, no staircase or fireplace would be complete without a dash of Christmas tree garland. Christmas garland adds a warm & festive feel to any holiday party. Hosting a night soiree? Then, Christmas garland with lights is the way to go. Lighted garland creates an elegant, warm glow for any party. And the best part? There’s pre-lit garland for the easiest holiday decor of all. Shine on.
We raised our concerns with the American Christmas Tree Association, which stated in response that leaded PVC is no longer used at all in its members’ products. We also asked National Tree Company about its products specifically, and representatives confirmed that the company uses entirely lead-free PVC. We have no reason to doubt those claims, but since no federal standards or tests for artificial-tree materials exist, we have no independent data to confirm or contradict them, either. In general, it seems wise to wash your hands after setting up and decorating your artificial tree, as well as to prevent kids and pets from playing underneath it or (obviously) chewing on the branches. But the risk of lead exposure from a contemporary artificial Christmas tree is likely to be minimal to nonexistent.
Jack-Post manufactures tree stands in Asia and Michigan under a variety of brand names. The Welded Steel Christmas Tree Stand is the most heavy-duty option coming with its lifetime warranty and wide leg span of nearly 30 inches (for the large version). The base and the hollow legs of the stand are made out of steel, and the four T-nut tipped eye bolts are made of corrosion-resistant zinc dichromate.

Consider using a two-piece wreath to adorn a double-door entry. Start with a wreath that has a sturdy base so it will hold its shape. We used a fresh evergreen here, but a grapevine wreath will work just as well. Cut the wreath in half lengthwise with sturdy wire clippers. Use florist wire to attach evergreen clippings, fruits, and ribbons. Securely hang half of the wreath on each door so the two meet in the center when the doors are closed.


Featuring our exclusive Real Feel™ needles, our highly realistic trees mimic the texture and color of true evergreen foliage, allowing you to enjoy all of the advantages of an artificial Christmas tree without sacrificing the beauty of a real one. These realistic tree varieties look and feel so lifelike and natural, you can almost smell the familiar fragrance of snow-covered pine on Christmas morning. Its sturdy, evenly placed branches and tips offer plenty of room for your Christmas decorations, making it easier for all members of the family to hang their favorite cards and ornaments. From the lofty beauty of the Grand Fir to the sleek design of the Oregonian Slim that allows you to save decorating space, you can find a tree that fits your home and style perfectly.
This product was built to keep trees up to 12-feet tall and six-and-a-half inches in diameter stationed in place for all the days of the season. Between the welded steel and the four reliable eye-bolts, the tree doesn’t stand a chance of tipping. Plus, the base is able to hold nearly two gallons of water, and is reinforced by zinc-dichromate hardware to prevent deterioration.
For a cheery retro look, start with a grapevine wreath (we painted ours white) and hot-glue classic round Christmas ornaments in a single color but different shades and sizes. When gluing, adhere the balls to both the wreath and one another for extra hold. Although this wreath makes a big statement, it's lightweight enough to be hung from a stick-on hook.

The GE 7.5’ Just Cut EZ Light Frasier Fir Dual Color LED has many favorable specs compared with our top pick from National Tree. It’s the same height and width, but it has more branch tips for a fuller appearance (2,076 versus 1,867). Like our top pick, the GE lets you switch between white and multicolor lighting modes; in addition, the GE model’s light strings connect automatically via the central pole as you assemble the three sections of the tree, a minor but handy feature that our top pick lacks. But we are especially fond of the way GE’s LED Christmas lights look—in our test, we found them to come closest to the familiar warm glow of incandescent bulbs. However, the GE has 600 lights, versus our top pick’s 750, meaning it falls just short of our recommended 100 bulbs per foot of tree. And at 30 percent polyethylene, versus 37 percent on the National Tree pick, the GE tree has a lower proportion of ultra-realistic branch tips—and a higher proportion of fake-looking PVC “needles.” You’ll never notice a difference from across the room, but up close you may find the GE slightly more artificial-looking.
The 12 ft. Snowy Pine is an Artificial The 12 ft. Snowy Pine is an Artificial Christmas Tree from Fraser Hill Farm. This model features a traditional full silhouette with extremely lifelike foliage and all-metal hinged branch construction. A heavily flocked finish was designed to resemble freshly fallen snow that is true to season and produces a natural ...  More + Product Details Close
×