For a solid stand at a lower price, we like the Cinco C-144E Express. The Cinco is similar to the Krinner in terms of stability, and both maxed out our force gauge. It uses a traditional bolt-tightening method, which is nowhere near as easy to set up as the Krinner, but a quick-release on the bolts makes the Cinco’s operation faster and easier than that of similarly priced competition. Think of this as a particularly good version of your basic tree stand—you still have to crawl underneath to secure the trunk while someone helps hold the tree from the top, but at least you’ll spend a little less time down there.
It's a little awkward, so we'll get straight to the point: This Friday we humbly ask you to protect Wikipedia's independence. We depend on donations averaging about $16.36, but 99% of our readers don't give. If everyone reading this gave $3, we could keep Wikipedia thriving for years to come. The price of your Friday coffee is all we need. When we made Wikipedia a non-profit, people warned us we'd regret it. But if Wikipedia became commercial, it would be a great loss to the world. Wikipedia is a place to learn, not a place for advertising. It unites all of us who love knowledge: contributors, readers and the donors who keep us thriving. The heart and soul of Wikipedia is a community of people working to bring you unlimited access to reliable, neutral information. Please take a minute to help us keep Wikipedia growing. Thank you.
Ease of assembly, disassembly and storage: Most of the artificial trees on the market (including the ones on our list) come in three parts that are easy to click together. However, the process of “fluffing” the tree (spreading the tips apart and arranging the branches) can be time consuming. The more time you spend fluffing your tree, the better it will look. More on that later.
Ideally, you want a mixture of plastic and metal. The best Christmas tree stands that we tested used metal for the moving parts and plastic in the interior. You don't want metal all the way through because trees have to be water and that can corrode steel. The exterior should be made of either metal or high-density plastic. Both of these materials resist impact and scuffing so the stand can last for years to come.
As we set up each tree with each stand (in the pouring rain), we noted how difficult it was to get the tree into the stand, position it, and fasten the tree inside. We also looked at how hard it was to make adjustments to straighten the tree. We then filled the stand’s reservoir with 1½ gallons of water (or the stand’s maximum, if it was less than this amount), and noted how difficult it was to fill, and how likely it was to overflow or spill onto your floor.
Real vs. fake. Which is better? It’s a highly-contested topic each holiday season, and it’s one that the American Christmas Tree Association (the organization representing the artificial tree industry) and the National Christmas Tree Association (the organization representing the real tree industry) take seriously. Both groups make their cases for selecting either a real or faux tree, and we used them to inform our comparison.
It comes in a triangular-shaped box, and it is folded up. The tree is folded, I mean. It is sort of like paper-mache around wire. The "pine needles" are plastic, and can fall off. The ornament is wrapped up in the blanket. It was difficult to shape the tree into what it is supposed to look like, but I guess I didn't do too bad. I think the original tree doesn't have as many branches actually. The stand is horrible. The tree has a screw on the end you're supposed to screw into the base. It stuck through one piece of wood, and the other piece is too large, so it slips right out and since it is top heavy, can fall right over. So, I actually have a ruler sitting underneath the side of the base to keep it standing.
The 30" round Christmas Tree Mat is composed of two non-woven fiber materials separated by a patented barrier media. It is lightweight and can be easily cleaned. It is designed to protect hardwood and carpeted floors from spilled live tree stand water and resulting stains as well as hardwood scratches associated with a trimmed tree during the holidays. Can be used with live or artificial trees.
Cost and realism go hand in hand. Using molds often taken from actual branches, artificial-tree manufacturers shape polyethylene, or PE, to produce highly realistic branch tips. More tips generally make the tree look fuller, with fewer gaps, and more tips cost more money. Similarly, a higher percentage of polyethylene in a tree’s construction generally equates to greater realism—and a higher price. Our pick, for reference, has 1,867 tips and is 37 percent polyethylene, and is convincingly lifelike even up close. You can get trees with far more eye-popping stats, though. This particularly lovely Balsam Fir from Balsam Hill’s most-realistic line of trees, for example, has almost 6,000 tips and is 70 percent polyethylene—and comes at a price to match that extravagance. As with real trees, overall bigger sizes come with bigger costs: House of Holiday, for example, carries more than two dozen trees measuring 12 feet or taller with price tags north of $1,000.
This product was built to keep trees up to 12-feet tall and six-and-a-half inches in diameter stationed in place for all the days of the season. Between the welded steel and the four reliable eye-bolts, the tree doesn’t stand a chance of tipping. Plus, the base is able to hold nearly two gallons of water, and is reinforced by zinc-dichromate hardware to prevent deterioration.
A layer of cork on the bottom of the stand protects your floors, which is nice if you have hardwood. The most innovative aspect of this stand is the vertical arms, which can be adjusted up or down to avoid issues with limbs. That’s a much better solution than just cutting them off and taking away some of the fullness of your tree. Santa’s Solution has a 1.5 gallon water reservoir and holds trees as tall as ten feet, with trunks up to 6.5 inches in diameter.
The TV special A Charlie Brown Christmas (1965) was influential on the pop culture surrounding the Christmas tree. Aluminum Christmas trees were popular during the early 1960s in the US. They were satirized in the Charlie Brown show and came to be seen as symbolizing the commercialization of Christmas. The term Charlie Brown Christmas tree, describing any poor-looking or malformed little tree, also derives from the 1965 TV special, based on the appearance of Charlie Brown's Christmas tree.
A wreath on the front door is a welcome sign to visitors and a traditional way to decorate outdoors for the holiday. An average front door measures 36 inches across, so a 28-inch wreath could hang nicely centered on the door about a foot below the top with space on either side. To accent with an oversized look, hang a 36-inch wreath to adorn the full width of the door. If your front door is larger, you can go for a larger wreath or if you have double front doors place a matching wreath on each door for a truly festive feel.
On December 6, 2001, a half-hour documentary on the special titled The Making of 'A Charlie Brown Christmas' (hosted by Whoopi Goldberg) aired on ABC. This documentary has been released as a special feature on the DVD and Blu-ray editions of the special. In subsequent years, to allow the special in an hour timeslot to be broadcast uncut for time, the animated vignette collection, Charlie Brown's Christmas Tales, is broadcast in the remaining time for that hour.
The Good Tidings Tabletop Tree Stand is made almost entirely of hard polypropylene. The base measures 14 inches in diameter and 8 inches tall. It holds 0.75 gallons of water. A problem with many tree stands is the screws used to hold the trunk in place are susceptible to rusting. That is not a problem with this model thanks to the plastic, quick-turn bolts. The unit holds trunks with a thickness of up to three inches.
As with most tree stands, watering the tree’s reservoir is still a chore, and you have to be careful when filling it. The majority of the Krinner’s reservoir is enclosed, and there is only a small space near the trunk for watering. You could make the case that this narrow opening has advantages—pets will not be able to easily drink from it and gifts are less likely to fall into it. The gauge that tells you how much water is in the stand also has a very clear “Stop” indicator that shows when you’ve filled it enough. However, there is no overflow tray, a feature some other stands have that we’d like to have seen here.
The speed nut design allows you to quickly prop up your tree without sitting there, holding the tree for countless minutes as you turn long traditional screws. The product uses a speed nut that quickly positions the locking pins, allowing you to set them with a couple quick turns for an incredibly stable lock. The bases are made of heavy-duty polyethylene that's safe and devoid of any harmful chemicals. Designed for artificial trees, this tree stand fits all size trees with 1-3 inch diameter...
Virtually all contemporary artificial trees have branches permanently mounted on hinges on the center pole. This design means that they all unfurl into place quickly when you set up the tree; in the past, you often had to snap individual branches into sockets on the center pole one by one, a time-consuming and fussy process. For this guide, we sought trees with permanently mounted, hinged branches—not that there’s much choice on that anymore.
Testing came in three phases looking at assembly, usage, and stability. During the assembly stage, we always tried to set up the stands without looking at the instructions first. It’s not because all the testers were men–mostly. A Christmas tree stand should last for years and from season to season, instructions get lost. Intuitive design is a must. We used a seven-and-a-half foot tall Fraser fir. After surveying our office and researching the average ceiling height for American households, we decided to get a tree that was no taller than eight feet, but not shorter than seven.
Our designs offer a combination of the most popular artificial Christmas tree features at affordable price points. Whether you need a tree with a slim shape, LED lights, or realistic foliage, you will be able to find one that the whole family will love - no compromise required. For decorating inspiration and gift ideas, visit the Tree Classics blog. There we show you how you can maximize your tree and holiday décor with practical tips and tricks. When done browsing, easily place orders through our convenient online store.
Because a live Christmas tree has lots of roots you'll need more of a bucket to keep the tree fresh and healthy. This base can hold up to a nine foot tree with a whopping six inch diameter trunk. Once the stand is set up (less than five minutes) the whole tree (roots and all!) get placed into the bucket, and the turn straight system will ensure it sit prettily inside. A one-gallon basin for water keeps your tree nice and hydrated.
National Tree Company’s 7½-foot, unlit Feel Real Downswept Douglas Fir (PEDD1-503-75) is a great tree at a great price, if you don’t need lights included. It’s the same size as our main pick, with the same generous branch count (1,867), sporting that same full, room-filling form. It’s identical in construction, too, with the same realistic polyethylene tips, hinged branches, and three sections. You’ll have to string the lights yourself, of course. If you already own enough lights for a 7½-foot tree (roughly 700 bulbs, per the 100-per-foot guideline), choosing this tree is a no-brainer, since you’ll save a chunk of money. Or if you simply prefer to string your own, even if it means spending down those savings, go for it—check out our recommended set of LED Christmas lights, or pick up three 300-bulb strings of incandescents for about $30. And for smaller homes and apartments, we think the 6½-foot version of this tree also makes a great pick.
A final drawback: The Krinner is expensive. At about $90, it is definitely on the high end of the tree stand price scale, but it’s significantly better than all the other stands we tested. We feel its multiple advantages make it worth the price—and a lot of the positive Amazon reviews are written by customers who hesitated to spend so much but ultimately felt it was worth it.
Unlike other models, this stand doesn’t come with screws or assembly required. To use, simply place the tree in the stand, hold it and then pump the foot pedal until the claws grasp the tree into place.This patented structure is designed to hold trees up to 12 feet tall securely in place with only a few minutes of assembly required. Plus, its automatic water level indicator retains up to two-and-a-half gallons of liquid, so can you rest-easy knowing your accent will be watered — even on the days you forget!
“For years, we’ve stuffed all of our ornaments on two-thirds of our artificial tree so we could see them all. It got pretty crowded. This stand is the solution to that problem. The stand has a big diameter base, which gives a good, solid footprint to support the tree. The cord has the switch built in to it, which has two buttons: one to turn the rotation on or off, and another that turns the lights on or off. So you can have separate, independent control of both lights and rotation. The top of the stand has two outlets built in to power a couple strands of lights. The hole has four screws to hold the tree post securely. One caution I offer is that the hole is exactly 1.25 inches in diameter, so make sure your tree post is that diameter or less. The rotational speed is just right for viewing ornaments continuously without them swinging or swaying from the motion. The motor is very quiet. The stand is for artificial trees only. The design will not structurally support a real tree of any size — not beefy enough and has no water trough. The cost was a bit high, but we decided it was worth taking the chance and are glad we did. We should get many uses out of it and was well worth the cost. I highly recommend it.”
Please note that all tree heights indicated on our website include the tree stand. If you want the tallest Christmas tree your room will allow, we recommend buying a tree that is six inches shorter than your ceiling height to allow some clearance for a tree topper. For example, if you have a standard 8 - 9 foot ceiling, we would suggest a 7½ foot tree. Here are some more tips:
The life cycle of a Christmas tree from the seed to a 2-metre (7 ft) tree takes, depending on species and treatment in cultivation, between 8 and 12 years. First, the seed is extracted from cones harvested from older trees. These seeds are then usually grown in nurseries and then sold to Christmas tree farms at an age of 3–4 years. The remaining development of the tree greatly depends on the climate, soil quality, as well as the cultivation and how the trees are tended by the Christmas tree farmer.
The Black & Decker Smart Stand has a unique design that includes three sharp metal blades that grip a tree’s trunk after it’s been dropped into the stand, with no need to tighten anything. But it’s gotten a lot of negative reviews on Amazon. The Steel Welded Large Tree Stand and the Resin Tree Stand, like so many others, hold the tree with four bolts that must be threaded the entire way in. The water reservoir is also much smaller than those of the Krinner and Cinco. The Holiday Time Christmas Tree Stand is inexpensive but looks flimsy and also supports the tree with simple bolts.
The simple to set up and store option, saving you from having to purchase a new tree every year. With slim and small artificial Christmas trees for rooms short on space to full size firs and spruce trees, artificial trees are a great choice for any home. Artificial Christmas trees are also hypo-allergenic and don’t shed needles, making them ideal for families with pets or small children. Plug in a fir needle, spruce or eucalyptus scented oil air freshener or light a holiday scented candle to create that authentic Christmas tree smell. Whether you prefer traditional, rustic Christmas trees or trendy, pink Christmas trees, we can help you find the right fit.