A Christmas tree is the centerpiece of your holiday decorations, so you want to find the perfectly designed real or artificial Christmas tree (also known as a pop up Christmas tree) for your home. After all, Christmas trees are where you and your loved ones will gather on Christmas morning to spend time with one another and open presents. Selecting the right Christmas tree can be difficult because you want to make sure it fits well into your space. Do you want a faux Christmas tree or a real Christmas tree? Before purchasing a real or fake Christmas tree, make sure that you decide where you would like to place it in your home and measure the space. Do not forget to take into account the height of your tree topper when measuring Christmas trees. Typically, a tree topper takes up 4-6 inches of space. Ensure that your Christmas tree will fit in your home by measuring the height of your room before heading online to purchase a tree. If a real Christmas tree isn't for you, make sure to take a look through our huge selection of artificial Christmas trees.

If the National Tree and GE picks are unavailable, this Home Accents Holiday tree is a worthy alternative. It’s only 21 percent polyethylene—barely half our pick’s percentage—and up close, the fakey PVC needles that make up most of its foliage are pretty obvious. But its high branch-tip count (2,602 versus our pick’s 1,867) gives it a full, realistic appearance when viewed from across the room, and its greater girth (68 versus 59 inches) will fill even the largest living space. Like our other picks, its lights (750, same as our top pick) can switch between white and multicolored; and as on our GE also-great pick, the light strings connect automatically when you assemble the tree.
For this stand, three strong galvanized pins are included to help lock and centralize the tree in place, before the reinforced screws put in its final position. While this may take some time to complete, once it’s done, the stand holds any tree up to ten feet securely in place. Backed by a spill-proof guard and a water tank that can hold up to two gallons, keeping your tree moist will be a non-issue.
At only 2 ft. tall the Crestwood Spruce At only 2 ft. tall the Crestwood Spruce Tree is great for tabletop display or for adding holiday cheer to children's or secondary rooms. Trimmed with silver bristle pine cones red berries and glitter this tree is pre-lit with 35 energy-efficient and long lasting multicolor LED lights. It features battery ...  More + Product Details Close
Join the tree skirt revolution and take the ironing out of hiding the base of your Christmas tree. Plastic tree collar assembles in just minutes by lining up the patent-pending magnetic connection points. The collar features a basket weave pattern to add depth and character and is fully washable and waterproof. Disassembles for easy post-Christmas storage.
In 2013 Tams-Witmark Music Library, Inc. began licensing an official stage version of the television special authorized by the Schulz family and Lee Mendelson.[43] The stage version follows the television special but includes an optional sing-along section of Christmas songs at the end. It includes all of Vince Guaraldi's music from the television special and the television script is adapted for the stage by Eric Schaeffer. It has been performed at hundreds of schools, churches and community theatres.
If you want a rotating stand for a live tree, you don’t have many choices. This one from Northlight will hold trees smaller trees between 4 and 7 feet tall, and up to 65 pounds. You don’t even have to worry about the lights unwrapping from the tree, since this stand rotates 150 degrees one way, then 150 degrees back the other way. Just build in a little slack in the cord to account for that. A three-way switch lets you choose among the three settings: rotation, rotation with Christmas songs, and songs only.
National Tree Company’s 7½-foot, unlit Feel Real Downswept Douglas Fir (PEDD1-503-75) is a great tree at a great price, if you don’t need lights included. It’s the same size as our main pick, with the same generous branch count (1,867), sporting that same full, room-filling form. It’s identical in construction, too, with the same realistic polyethylene tips, hinged branches, and three sections. You’ll have to string the lights yourself, of course. If you already own enough lights for a 7½-foot tree (roughly 700 bulbs, per the 100-per-foot guideline), choosing this tree is a no-brainer, since you’ll save a chunk of money. Or if you simply prefer to string your own, even if it means spending down those savings, go for it—check out our recommended set of LED Christmas lights, or pick up three 300-bulb strings of incandescents for about $30. And for smaller homes and apartments, we think the 6½-foot version of this tree also makes a great pick.
Real vs. fake. Which is better? It’s a highly-contested topic each holiday season, and it’s one that the American Christmas Tree Association (the organization representing the artificial tree industry) and the National Christmas Tree Association (the organization representing the real tree industry) take seriously. Both groups make their cases for selecting either a real or faux tree, and we used them to inform our comparison.

This tree is misleading under the "auspices" of it being an official Charlie Brown Christmas Tree. I bought one a few years back and gave it to my dad. This tree was junk compared to the other tree. It is what is commonly referred to as a "knock off" and a poor one at that, i might add. There was no gllitter on the base that was stamped "Peanuts" as if to give it some "official" sort of appearance. There was no blanket for the base unlike its description, and the branches are distasteful -- even though that is supposed to be the intent. I cant believe the tree manufacterer has stooped to an all-time low by not making the sprigs of needles better and economizing by not including the blanket. You are PIRATING a copyrighted item. Have you no shame, you thieves? I hope Shultz and company sues you.
Artificial Christmas trees are a great way to save time and money each year. We carry a wide array of realistic faux holiday trees available both unlit or pre-lit with LED and incandescent lights. We also carry imitation alpines, colored trees, and fiber optic trees from quality brands including Darice, Northlight and Vickerman. All artificial trees are available in a variety of styles and sizes, including giant commercial sizes and slim, space-saving options.
Because we advised against pre-lit trees (as you typically can’t remove the lights from the tree even if they burn out), we chose to focus our research on unlit trees. That being said, we know that the convenience of a pre-lit tree is sometimes irresistible. And we have to admit, they make festive night lights. So, we’re still sharing our favorite pre-lit pick.
^ "1 мая собираются праздновать 59% россиян" [May 1 going to celebrate 59% of Russians] (in Russian). April 27, 2012. Archived from the original on 2012-11-01. Retrieved December 2, 2012. New Year is among the most important holidays for 81% of Russians, while Christmas is such only for 19%, ranking after Victory Day, Easter, International Women's Day.

“For years, we’ve stuffed all of our ornaments on two-thirds of our artificial tree so we could see them all. It got pretty crowded. This stand is the solution to that problem. The stand has a big diameter base, which gives a good, solid footprint to support the tree. The cord has the switch built in to it, which has two buttons: one to turn the rotation on or off, and another that turns the lights on or off. So you can have separate, independent control of both lights and rotation. The top of the stand has two outlets built in to power a couple strands of lights. The hole has four screws to hold the tree post securely. One caution I offer is that the hole is exactly 1.25 inches in diameter, so make sure your tree post is that diameter or less. The rotational speed is just right for viewing ornaments continuously without them swinging or swaying from the motion. The motor is very quiet. The stand is for artificial trees only. The design will not structurally support a real tree of any size — not beefy enough and has no water trough. The cost was a bit high, but we decided it was worth taking the chance and are glad we did. We should get many uses out of it and was well worth the cost. I highly recommend it.”
Add a traditional touch to your holiday home Add a traditional touch to your holiday home deor this season with our 24 in. Artifical Meadow Fir Christmas Wreath. This wreath features 225 evergreen tips for an elegant natural look. Pre-wired with 35 battery-operated warm white LED lights for a gorgeous glow. A timer is included allowing you to ...  More + Product Details Close
Maybe you don’t want to spend a couple hundred dollars on a tree stand. But maybe you buy huge, heavy trees. And maybe one year, that huge heavy tree fell down when your inexpensive and delicate stand broke. Maybe then you change your mind and get a Bowling’s. Made in Michigan since 1989, these steel stands can handle any tree you bring home. The classic, almost industrial design looks great even without a tree skirt, and the big reservoirs hold plenty of water, so you won’t have to refill it quite as often as other stands.
“I was VERY impressed by this affordable little tree!! Came in perfect condition, set up in less than two minutes, lights worked perfectly, and it has a very sturdy, dependable base. It breaks down into a box that a short stack of large dinner plates could fit into. All in all, I would consider it my best-valued decoration in my home to date, as far as price goes. It definitely makes a beautiful holiday statement and I’m sure I will be displaying it for YEARS to come! I may add some more LED lights myself for a more profound look at night, though.”
The Emerald Innovations stand in particular had our hopes up because it lets you adjust the angle of the tree by pressing a foot pedal and turning the tree on a large ball joint. But the initial setup proved more of a hassle than any other method: A separate sleeve fits over the tree’s trunk while it’s lying down, and you secure it with screw-down clamps. Then you fit the sleeve and tree together into the base. The frustrating setup, along with the lack of stability, outweighed the otherwise cool design.
^ Morris-Pierce, Elizabeth; Berger, Stephen A.; Dreher, Eulonda A.; Russel W. Dalton; D. Andrew Richardson; Jeanne Mueller; Judith Hale Wood; Ellen Edgar; James Edgar (1 January 2002). In Search of Christmas. CSS Publishing. p. 27. ISBN 9780788019166. Chrismons were first used in 1957 to decorate a Christmas tree in the Lutheran Church of the Ascension in Danville, Virginia.
Well-designed Christmas tree stands hold up your tree for the entire holiday season. Investing in an artificial tree stand prevents you from having to purchase one each year. Affordable Christmas tree stands are elegant and effective for decorating your home during the holidays. There are distinct differences between Christmas tree stands, so you should consider your unique needs before purchasing a stand. For example, the width and height of your tree will determine the unique type of Christmas tree stand that you need. You can also match your Christmas tree stand to your Christmas tree skirt to create a cohesive aesthetic design. Artificial Christmas tree stands are necessary to hold up your tree, so make sure you don't forget to pick one up this holiday season!
Puleo is Larry Gurino’s favored brand at House of Holiday; like National Tree, it’s a New Jersey–based, family-run business. Unfortunately, Puleo is not as widely available as some other brands, but its quality ranks among the best. Gurino has sold Puleo trees for 20 years, and they were some of the nicest-looking trees we came across in our search. If you find one you like, you can be confident in your purchase.
The speed nut design allows you to quickly prop up your tree without sitting there, holding the tree for countless minutes as you turn long traditional screws. The product uses a speed nut that quickly positions the locking pins, allowing you to set them with a couple quick turns for an incredibly stable lock. The bases are made of heavy-duty polyethylene that's safe and devoid of any harmful chemicals. Designed for artificial trees, this tree stand fits all size trees with 1-3 inch diameter...
Tree stands are designed for trunks of a certain length and diameter. Typically, you use a tree stand designed for a taller tree on a smaller one. The exception is when the trunk is too narrow. For example, a tree stand designed to take a 12-foot tree may only take a trunk that's down to three inches in diameter, any slimmer and you risk the tree falling over.
^ Blainey, Geoffrey (24 October 2013). A Short History of Christianity. Rowman & Littlefield Publishers. p. 418. ISBN 9781442225909. Many Lutherans continued to set up a small fir tree as their Christmas tree, and it must have been a seasonal sight in Bach's Leipzig at a time when it was virtually unknown in England, and little known in those farmlands of North America where Lutheran immigrants congregated.

The issue was two-fold. First, the TA503068 relies on a stout spike in the middle of the stand. To keep the tree stable, you should bore about a half-inch hole in the bottom of your tree. Many stands utilize some sort of impaling measure, but few require the usage of a drill. The second issue we had was with the shallow design. The bolts grip the trunk at around the four-inch mark–that's not a lot of purchase. When struck, our listed to one side. The website lists that it can handle an eight-foot tree, but we won't put anything nearly that tall in this one.

Since the early 20th century, it has become common in many cities, towns, and department stores to put up public Christmas trees outdoors, such as the Macy's Great Tree in Atlanta (since 1948), the Rockefeller Center Christmas Tree in New York City, and the large Christmas tree at Victoria Square in Adelaide. The use of fire retardant allows many indoor public areas to place real trees and be compliant with code. Licensed applicants of fire retardant solution spray the tree, tag the tree, and provide a certificate for inspection. Real trees are popular with high end visual merchandising displays around the world. Leading global retailers such as Apple often place real trees in their window displays. In 2009, Apple placed two Fraser fir trees in every one of its retail establishments.[citation needed]

Deck out your space in festive holiday spirit with this artificial Christmas tree stand! Crafted of sturdy steel, this tree stand sports a forest green finish to blend in with your tree. Designed to fit artificial Christmas trees from 6' to 7.9' tall, and less than 3' diameter, this stand features a 1.25" opening complete with a tightening screw. When the holiday season is over, and it’s time to take down the tree, this stand’s four legs fold flat for effortless storage.

Once the tree is installed, it’s hard to overemphasize how stable this stand is. In our stability testing, the Krinner Tree Genie XXL was able to max out our force gauge at 50 Newtons when testing with both small and tall trees. The tree stand even outlasted the test materials: We bent the hook on the force gauge trying to get it to tip over, and at one point we snapped the twine we had tied to the tree. The stand itself weighs 18 pounds, which you might expect to make it stable, but it actually has a smaller footprint than most of the other stands. That’s another advantage: It’s easier to store during the non-Christmas months.
The Black & Decker Smart Stand has a unique design that includes three sharp metal blades that grip a tree’s trunk after it’s been dropped into the stand, with no need to tighten anything. But it’s gotten a lot of negative reviews on Amazon. The Steel Welded Large Tree Stand and the Resin Tree Stand, like so many others, hold the tree with four bolts that must be threaded the entire way in. The water reservoir is also much smaller than those of the Krinner and Cinco. The Holiday Time Christmas Tree Stand is inexpensive but looks flimsy and also supports the tree with simple bolts.
Balsam Hill's designers carefully craft our trees to mimic nature using site visits and cutting from live trees to guide them. We offer three types of foliage options that are made from either PE or PVC material. While some trees use one type of foliage exclusively, others may use mix of foliage types to achieve a particular look. The specific mix is specified on each product detail page in the section that describes the tree's foliage.
Tinsel and several types of garland or ribbon are commonly used to decorate a Christmas tree. Silvered saran-based tinsel was introduced later. Delicate mold-blown and painted colored glass Christmas ornaments were a specialty of the glass factories in the Thuringian Forest, especially in Lauscha in the late 19th century, and have since become a large industry, complete with famous-name designers. Baubles are another common decoration, consisting of small hollow glass or plastic spheres coated with a thin metallic layer to make them reflective, with a further coating of a thin pigmented polymer in order to provide coloration. Lighting with electric lights (Christmas lights or, in the United Kingdom, fairy lights) is commonly done. A tree-topper, sometimes an angel but more frequently a star, completes the decoration.
Pre-lit trees make up 90 percent of the artificial trees sold in the US, according to the American Christmas Tree Association; incandescent bulbs still dominate, but LEDs are rapidly making inroads. LED bulbs cost a bit more up front but should last longer than incandescents, in both lifespan and durability terms. However, modern incandescents are more reliable than those of the past, and one burned-out bulb no longer necessarily causes the whole string to go dark. On pre-lit trees, you want roughly 100 bulbs (or more) per foot of tree height; less than that looks a bit sparse. Finally, you shouldn’t pay extra for the fancy flashing patterns that are increasingly common, unless you know you’ll use them. As Larry Gurino of House of Holiday confided to us, “Most people don’t use them—they just want to see them [advertised] on the box.”
Maybe you prefer the traditional bolted stand, or maybe you're in the market for a stand that's designed to make set-up a total breeze. Or, maybe you just want one that's secure enough to hold the biggest tree you can fit inside your house. In any case, these are the best Christmas tree stands you can buy this holiday season, and why they're worth the purchase. Add your favorite ornaments, and you're good to go.
National Tree Company has a warranty for its realistic pre-lit trees taller than 6½ feet, like our pick, that covers manufacturer defects for five years from the date of purchase. The lights are covered for two years. You’ll need proof and date of purchase to file a claim, and you’ll need to have treated the tree and lights with reasonable care to have your claim approved. (Details here.) The 6½-foot version of this tree also falls under that warranty, and we recommend it for smaller homes and apartments.
Deck out your space in festive holiday spirit with this artificial Christmas tree stand! Crafted of sturdy steel, this tree stand sports a forest green finish to blend in with your tree. Designed to fit artificial Christmas trees from 6' to 7.9' tall, and less than 3' diameter, this stand features a 1.25" opening complete with a tightening screw. When the holiday season is over, and it’s time to take down the tree, this stand’s four legs fold flat for effortless storage.
Jack-Post manufactures tree stands in Asia and Michigan under a variety of brand names. The Welded Steel Christmas Tree Stand is the most heavy-duty option coming with its lifetime warranty and wide leg span of nearly 30 inches (for the large version). The base and the hollow legs of the stand are made out of steel, and the four T-nut tipped eye bolts are made of corrosion-resistant zinc dichromate.
Box shows visible wear and tear. Comes with stand and small red ornament. Tree is a little worn and one of the branches is a little snapped, fixable with tape or glue. Extremely cute and unique for any display. If you have any questions feel free to message me and feel free to shoot me any offers! Item will be shipped same day it’s purchased and will be bubble wrapped and protected.

For one, several of this GE tree’s specs are favorable when compared with our top pick from National Tree. It’s the same height and width, but it has more branch tips for a fuller appearance (2,073 versus 1,867). Like our top pick, the GE lets you switch between white and multicolor lighting modes; additionally, the lights connect automatically through the central pole as you assemble the three sections of the tree, a handy (but not vital) feature. But we especially love the way GE’s LED Christmas lights look—in our test of Christmas lights, we found GE’s tones closest to the familiar warm glow of incandescent bulbs. That’s not to say anything against National Tree’s lights: We found them very pretty, especially the pale gold of the white-light setting. But if you seek something close to the incandescent look, the GE tree may be your ticket.
The speed nut design allows you to quickly prop up your tree without sitting there, holding the tree for countless minutes as you turn long traditional screws. The product uses a speed nut that quickly positions the locking pins, allowing you to set them with a couple quick turns for an incredibly stable lock. The bases are made of heavy-duty polyethylene that's safe and devoid of any harmful chemicals. Designed for artificial trees, this tree stand fits all size trees with 1-3 inch diameter...
A Charlie Brown Christmas is a 1965 animated television special based on the comic strip Peanuts, by Charles M. Schulz. Produced by Lee Mendelson and directed by Bill Melendez, the program made its debut on CBS on December 9, 1965. In the special, lead character Charlie Brown finds himself depressed despite the onset of the cheerful holiday season. Lucy suggests he direct a neighborhood Christmas play, but his best efforts are ignored and mocked by his peers. After Linus tells Charlie Brown about the true meaning of Christmas, Charlie Brown cheers up, and the Peanuts gang unites to celebrate the Christmas season.
This lightweight plastic stand weighs less than 3 pounds and holds trunks up to 7 inches. You’ll need two people to install your tree—and occasionally you’ll have to pick the tree up a second time in order to slam it back down into the stand with enough force to get the spikes in the base to dig into the trunk—but you can’t beat the price. The reservoir holds two gallons, so you might even be able to skip a day of watering with this thing.
“We used this for a three- to four-foot tree this past Christmas, and it’s a perfect stand with a nice, deep well, so you don’t have to water constantly (and it doesn’t spill easily). I had the hardest time finding a stand for a small (but not tiny) tree, but we hit the jackpot with this guy. The screws are easy to use, and screw easily, and since you’re dealing with a small tree, it’s not nearly the ordeal that putting big trees in a stand is. As long as we’re in our little apartment and buying more diminutive Christmas trees, this guy will serve us well. Highly recommend!”
If our pick isn’t your cup of tea, the good news is, you generally get what you pay for in artificial trees, and you can rely on a few key specs when shopping. The price directly relates to the number of branch tips, the height, and the girth—an often-overlooked factor that Gurino emphasized in our interview—and all those details contribute to the tree’s general level of realism. Pretty much all trees come out of a handful of factories in China and Taiwan to be branded and sold here, with the same tree sometimes renamed. National Tree Company representatives told us on a visit to its New Jersey headquarters that the tree sold as the Bucks County Fir in Pennsylvania may be called something totally different in Connecticut. You may very well find another brand selling a different version of the Downswept Douglas Fir, disguised by some superficial finishing touches that could suit your style better. If one of the brands we recommend has something you like, and the specs and price seem in line with our reporting, you’ve probably found your perfect tree.
The small size of this Dunhill Fir tree The small size of this Dunhill Fir tree makes it a great choice for display on tabletop in secondary rooms or children's rooms. Pre-strung with 450 multicolor lights this tree features hinged branch construction and includes a sturdy metal tree stand making assembly quick and easy. Though compact in size ...  More + Product Details Close
This EZ-Water tree stand is perfect for your holiday needs. This tree stand is very easy to use. The best part is that this stand is used for trees up to a 8 feet tall. Stand water capacity can hold up to 1.25 gallons of water. Metal bolts and nuts provide for a better more stable contact between stand and tree. This tree stand comes in a black finish.

Problems donating? | Other ways to give | Frequently asked questions | We never sell your information. By submitting, you are agreeing to our donor privacy policy. The Wikimedia Foundation is a nonprofit, tax-exempt organization. If you make a recurring donation, you will be debited by the Wikimedia Foundation until you notify us to stop. We'll send you an email receipt for each payment, which will include a link to easy cancellation instructions.
×